FOXEER ARROW V2 HS1190 WDR FPV CAMERA WITH OSD

The NEW Foxeer Arrow V2 HS1190 camera is the advanced version of the Foxeer HS1177. It features an excellent wide dyanmic range function and supports DC5-22v wide voltage range. It also has an inbuilt OSD and MIC.

This is Version 2 (V2) of the Foxeer Arrow, and as a result boasts multiple improvements over the V1. Those improvements are:

1. User name, timer, and voltage be controlled separately, and their position can be moved.
2. The OSD no longer flashes
3. Features up to 35v direct plug-in
4. Upgrade to 7pin to monitor battery consumption
5. Voltage data adjustment by OSD if the voltage is not according with real power
6. Cable Connector (2pin) is short and matches an extend cable (could be removed), which makes OSD setup a breeze.

This Foxeer Arrow V2 HS1190 FPV Camera comes standard with a 2.8mm lens, and IR Block filter. You may purchase a 2.1mm or 2.5mm lens as well.

Features:

600TVL/700TVL
1/3 Sony Super HAD II CCD
Built in FPV OSD (Votlage, Flight Time, Name)
Built in Audio
Wide Dynamic Range (D-WDR)
Wide Voltage Range DC5V-22V
Various Installation Options
2.8mm & PAL
IR-Block
Color: Black

Note: The 2.1mm, 2.5mm and 2.8mm lens are fit for HS1177 and HS1190 camera.

Warning:  Always use a LC filter or an electrolytic capacitor when connecting this camera. New generation ESCs like the DYS SN20A or the FVT Littlebee 20A can cause voltage spikes of up to 40 Volt with Damped Light / braking activated.