Skywalker SMART 996mm Wingspan EPO FPV Racing Wing RC Airplane Kit

Skywalker Smart: https://www.fpvmodel.com/skywalker-smart-996mm-wingspan-epo-fpv-racing-wing-rc-airplane-kit_g1362.html

FPV wing racing is a growing quickly and has the peotential of being bigger than mini quad racing due to the facts that wings are faster than miniquads and easier to see in a race. Being easier to see in a race allows spectators to feel more involved while watching an event. 

This potential has been noticed by Skywaker and now Skywalker is throwing in their own design ideas with Skywalker Smart. Skywalker Smart is a dual motor design that is focused on serious power, allowing the user to climb to speed over 140kph. Featuring a 996mm wingspan, Skywalker Smart is large enough to get all your gear in the air but small enough to ensure lightning fast speeds with quick and agile air manuevers. Skywalker Smart can have several different methods of take off with two most common methods of take off being hand tossed or vertical launch. Skywalker Smart FPV Racing Wing doesn’t stray to far away from the mini quad racing scene and if your familiar with mini quads you’ll feel right at home with this built. 

The motors, escs, fpv gear ,and flight contollers are all the same specs that you find in your typical mini quad build. Recommended motors are 2206 2300kv with 35a ESC combinations. For awesome flight controller preformace with the much need PWM out puts servo and motor connection we recommend X-Racer F4 flight controller. You can find a review and detailed description by Oscar Liang here.

Specification: 

• Wing span: 996mm
• Fuselage length: 430mm
• Wing area: 25.9m2
• C.G.: From head to back 240-250mm
• Flying weight: 750g-1000g
• Takeoff：Hand cast
• Landing: Belly Landing
• Air speed: 60km/h
• Maximum of flying time: 30min

Recommended configuration: (not included)

• Motor: 2206kv2300*2pcs 
• ESC: 30A*2pcs
• Servos: 12g*2pcs
• Propeller: 5045E/ep*2pcs
• Battery:4s 1500-3300mah
• Radio: 3CH 2Servos

Excellent inner layout setting, perfect for FPV racing.

Skywalker custom made metal motor seat, ensures the flight stability.

Double motors design, powerful and reliable.

The wing is attached with PCB plate and the small wing is connected with the copper clylinder, easy to assemble, disassemble and carry.

Design with two different hatches, suitable for the placement of different cameras.

 

Following up the principle of convenience, the Skywalker SMART uses magic claps and magic belts for easy use.

The bottom is attached with thin film, protected from the scratching with two layers. 

JIE-STAR X8 Skyhunter FPV Foldable RC Drone

Foldable design? Aerial photography? One key return and one key landing? Headless mode? WIFI and transmitter control? 

Yes, yes, yes !!! The Jie-star Skyhunter X8 quadcopter has all the functions you are looking for? Easy to control, easy to carry. Flying a drone has never been so easy. 

Where to buy? https://www.fpvmodel.com/jie-star-x8-skyhunter-fpv-foldable-rc-drone_g1355.html

JIE-STAR SKYHUNTER X8 RC quadcopter is an incredible UAV whose arms and landing skids can be folded manually, making it barely bigger than your palm. It is ready to fly out of the box. Therefore, you can put the drone into nearly any bag for an outdoor activity. SKYHUNTER is a multicopter intended for beginners since One Key Takeoff, One Key Landing, One Key Return are easily accessible so that you can control the drone with ease.

JIE-STAR SKYHUNTER X8 is no doubt one of the most popular portable drone on the market. FPV Model is a business partner of Jie-star, while others sell the X8 for over $60, here we are giving you a special price of $36.99. Check the link below, to see what others say at Youtube.

 

KL-EX90 The Brushless Micro Racer Launched

Soon after the release of X-Racer X-1, we now have a new micro racer, the X-Racer KL-EX90. 

The KL-EX90 is a 2" propeller 90 class airframe built for micro class FPV racing. 

All-up-weight is just 106 grams with a 2S 550mAh lipo battery. Because it is so small in size and so light in weight that under 250g, you do not need to register with FAA if you are from the United States to fly the KL-EX90.

Equipped with the reputable Gemfan 2035BN propellers, Flycolor RAPTOR S-Tower ( set of F3 Flight Controller and 4-in-1 ESC), Dragonfly MC1105 7500KV motors, Runcam Micro Swift camera, and built-in OSD, all make the KL-EX90 perfect for both LOS (Line of Sight) and FPV (First Person View) players.

Features:

• Small in size and light in weight. All-up-weight is 106 grams only with a 2S 550mAh lipo battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.
• Excellent power with just a 2S battery, even more powerful with 3S. It gives you very high speed, very precise and rail-like handling.
• Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.
• The reputable Flycolor RAPTOR S-Tower of F3 FC and 4-in-1 BLHeli_S 2-3S ESC gives you extremely good stability and flight performance.
• Equipped with powerful micro Dragonfly MC1105 brushless motors. Works great with Gemfan BN2035 propellers and Flycolor RAPTOR S-Tower.
• A Dragonfly 25mw 48ch Vtx is inlcuded to give an even more aero dynamic low profile design for the video transmission. 
• The flight controller is with built-in OSD.
• The design is inspired by the champion KL200Race racing drone. Much smaller in size, but gives you the same flying experience of professional 200 and 210 class racing drones.

32Bit Wraith32 BLHeli ESC Started Shipping Out

Join the revolution!

FPV Model has started shipping out the Wraith32 35A. If you have pre-ordered at fpvmodel.com before May 8th, you are having a chance to be the first one in the world receiving the BLHeli_32 ESC.

Wraith32 35A is the first 32bit BLHeli_32 ESC that supports Dshot1200 in the world. As per FPV Model’s update, the first batch is very limited in quantity and the next batch will be arriving around May 15th.

Order yours now!
https://www.fpvmodel.com/wraith32-32bit-35a-blheli_32-esc-dshot1200_g1271.html

All in One BetaflightF3 Flight Controller

BetaflightF3 is the flight controller designed to use every possible feature of Betaflight. More than the last half year has been spent by team FPV Model and Betaflight  in development. Boris B has worked with us to go over features and design aspects to help give us insight into what betaflight users want/need. 

This board features a 3A power draw giving users extra room for added attachments through uart ports. The six layer PCB is a more expensive design approach but was needed to give the ability to have a PDB that was capable of having wiring pads on both the top and bottom of the board. By using the six layer design we were able to increase the size of the pads and work around all the components all the while giving esc connections in the corners of the board rather than bunching all connections on either the top OR the bottom. Featuring a fully functioning OSD that can be configured in Betaflight this board will make configuring your OSD a breeze.

The team at betaflight have been hard at work developing DSHOT and this board is also compatible with the latest release. But we didn’t stop there, this board also features a micro adapter to accept TF cards for those of you that like to follow up your flights with reviewing black box logging...we think we know of at least one guy that will like that. 

Full specs & availability: http://www.fpvmodel.com/betaflightf3-flight-controller_g1231.html