Feiyu FY-WG 3-Axis Wearable Gimbal for GoPro and Similar Action Camera

The Feiyu FY-WG 3-Axis Wearable Gimbal is a miniaturized version of Feiyus handheld gimbals, offering motorized 3-axis stabilization in a compact, wearable form factor for GoPro HERO4, HERO3+, HERO3, and similarly sized action cameras. Designed with flexibility in mind, the FY-WG features 1/4"-20 threaded holes for horizontal, vertical, or inverted mounting onto a variety of support devices. It is can also be used with any accessory the uses the standard GoPro three-prong mount thanks to an included adapter, letting you capture all of the immersive action camera shots that youre accustomed to, but with full motorized 3-axis stabilization. For streamline operation, a single button turns the gimbal on and lets you switch between operating modes. You can also plug-in an optional remote control for adjusting pan, tilt, and roll angles and other calibration settings.

Camera Compatibility

Compatible with GoPro HERO4, HERO3+, HERO3, AEE action cameras, and other models with similar dimensions. There is also enough room to accommodate an attached GoPro LCD BacPac.

Flexible Mounting Options

Two 1/4"-20 threaded holes lets you mount the camera horizontally, vertically, or inverted. It can also be used with any accessory that has a standard GoPro three-prong mount using an included adapter.

Operating Modes

Pan Following Mode: Locks tilt and roll axes. Camera smoothly pans to follow the direction of the handle.
Tilt and Pan Following Mode: Locks roll axis. Camera smoothly follows the pan and tilt motion of the handle. All Axis Lock: Locks the pan, tilt, and roll axes of the camera in the position it is in when mode is activated.
Inverted Mode: Allows you to turn the gimbal upside-down. This mode is an inverted version of the Pan Following Mode.
Standby Mode: The gimbal remains on but the motor is shut down.

Camera Orientation Detection System

No matter how your camera is mounted (left-aligned or right-aligned, upright or inverted), the FY-WG will identify the mounting position and automatically make the appropriate adjustments to its configuration.

Single-Button Operation

A single button is used to turn the gimbal on/off and switch between operating modes.

Compatible with Optional Remote Control

An optional remote control is available that enables pan, tilt, and roll angle adjustment, as well as other calibration settings. For manual tilt adjustment, simply hold the camera in the desired position for about half a second to register the setting.

Additional Features

• Weighs only 6.6 ounces
• Consumes less than 10 microamps of power on standby
• Powered using two 900mAh 16340 type batteries (four batteries included)

 *Camera not included.

FeiYu G4 3-Axis Handheld Steady Gimbal

FeiYu G4 3-Axis Handheld Steady Gimbal is now available on sale at FPV Model.

When the first camera invented in 1839, the photographer had to sit in one place keeping still for hours to get one picture taken. In 1976 JVC company released the first domestic video camera that the users realized recording the daily life by filming. However the lumbering size and poor anti-vibration equipment resulted in a lot of limitations in photography. Meanwhile Garrett Brown from the USA invented the steadicam for more dynamic videos. But the weight of 20kg confused the users. Combined with FY high-tech and machinery, the FY G4 carrying sports camera is more portable and flexible. Simple operation with only one button for mode selection, an one hand operations is feasible. Pictures and videos can be captured clearly and steadily with the FY G4 in hand. Benefiting from the power of technology, follow your heart to experience more joyful extreme sports with FY G4. Easier to record splendid memories than ever before.

FY-G4 3-Axis Handheld Steady Gimbal Function And User Instructions

Instruction

The new FY-G4 3 axis handheld gimbal is suitable for Gopro4/Gopro3+/ Gopro3 and other sports cameras in similar size. Using internal limit to hide all wires make the users enjoying the extreme wireless control. Unique length design for easier holding.using with the second generation process system of Feiyu handheld gimbal process system to make it a more perfect filming tool.

With special thumb screw design to protect against thumb screw loss. With the new design thumb screw making G4 more steady even adding the LED backpack.

 

Connecting the extension bar easier free of special switch for it. The gimbal with longer length can shoot beautiful sceneries more easily.

FY Handheld Gimbal Extension Bar:http://www.feiyu-tech.com/product-en.php?id=45

FY-G4 Gimbal Remote Control

FY-G4 3-axis handheld gimbal offers the interfaces for power supply and video output to realize gimbal supplying the power to Gopro directly. The gopro can still work though without the inside battery as the gimbal can supply the power to it directly.

Function Instruction

● Heading Following Mode —— Pitch and roll locking, heading smooth rotation follow the direction of the handheld.

● Heading And Pitch Following Mode —— Roll locking ,heading and pitch smooth rotation follow the direction of the handheld.

● Locking Mode —— Heading ,pitch and roll locking.

● Special Working Condition (Inversion Mode) —— When in any working mode, press the function button for three times in succession, the Gimbal enter into the inversion mode and switch to the Heading following mode automatically. Invert the Gimbal to capture more excited scenes easily by switching mode combination. When in inversion working condition press the function button for three times in succession to reset the Gimbal back to the original state.

  

FY-G4 comparison with FY-G3Ultra

 

Operation Skill

Smooth And Steady Filming: Handheld the Gimbal, keep stable for movement, keep light and steady for walking.

How To Adjust The Pitching Angle: Double press the function button to enter into “Heading And Pitch Follow ”mode. Hold the Gimbal at the desired angle, then press the button once to reengage “Heading Follow ” Mode in order to lock the angle of desired pitch.

Selfie: Turn the Gimbal 180° so the function interface is facing you. Then, simply adjust the angle of pitch to the desired angle by utilizing the “Heading and Pitch Follow” Mode which described above and then switch back to “Heading Follow” Mode. Once complete you can film yourself with ease.

Flexible Use Of Inversion Mode: Press the function button for three times in succession, the Gimbal switch to the inversion mode and help to captured low angle view more easily.If filming with moving forward at a high speed, keep the handle roughly parallel with the ground will be helpful.

  

Initialization Instructions

1. Install the camera properly.

2. Gimbal placed on stationary flat and keep motionless.

3. Power on the Gimbal.

4. The Gimbal is activate and it will initialize automatically. Pick up the Gimbal to work normally.

FY-G4 needs to be initialized whenever the following situations appear after power on

1. After power on, the angle of pitch is not level with the horizon line.

2. After power on, the angle of roll is not parallel with the horizon line.

3. When the gimbal is in heading lock, the angle of heading moves frequently (heading is not stationary)

Specification

Software & firmware download:click here

For more details, please check it out at http://www.fpvmodel.com/feiyu-g4-3-axis-handheld-steady-gimbal_g876.html

FY-G3 Ultra Handheld Gimbal User Manual

FeiYu FY-G3 Ultra 3-Axis Steady Handheld Brushless Gimbal For Gopro 3/3+

Unit Price: US$349.00 (Free Shipping)

The following article is abstracted from http://www.fpvmodel.com/feiyu-fy-g3-ultra-3-axis-steady-handheld-brushless-gimbal-for-gopro-3-3-_g667.html.

Function Instruction

● Heading Following Mode —— Pitch and roll locking, heading smooth rotation follow the direction of the handheld.

● Heading And Pitch Following Mode —— Roll locking ,heading and pitch smooth rotation follow the direction of the handheld.

● Locking Mode —— Heading ,pitch and roll locking.

Identify the operation mode via switch to different status of the indicator light.Please check detailed indicator diagram below。

How To Use The Button

 

Identify the operation mode via switch to different status of the indicator light. Please check detailed indicator diagram below。

Operation Skill

The Skills Of Adjusting Pitch: Double click the button first to be in heading and pitch following mode. Adjust the attitude to move the pitch to the angle you want, then press the button once to lock the angle of pitch being in the heading following mode .

Autodyne Mode: Trun 180 degree of the gimbal (the USB port facing you). Adjust the angle of pitching through the method above, then you can autodyne easily.

Initialize The FY-G3 Ultra Gimbal

FY-G3 Ultra Gimbal needs to be initialized when the following situation appears:

1.  After power on, the angle of pitch has a little angle difference with the horizon line.

2.  After power on, the angle of roll has a little angle difference with the horizon line.

3.  When the heading is in the till condition, the angle of heading amends frequently in a small angle .

【 The method of initializing the FY-G3 Ultra Gimbal 】

Keep the gimbal in the still condition, then power on , it will initialize automatically.After that the gimbal can work normally.

The Maximum Rotation Angle Of The Axis

Note: Before you power up your gimbal,please mount the Gopro on first,,or it will cause the vibration. For brushless gimbal, please check it out at FPV MODEL. FPV Model is a professional B2C dealer of FPV plane and anything related to FPV.

• FY-G3Ultra Handheld Gimbal Manual 20140613.rar

Today's Recommend: FeiYu FY G3 Ultra 3-Axis Steady Handheld Brushless Gimbal For Gopro 3/3+

Today's Recommend: FeiYu FY G3 Ultra 3-Axis Steady Handheld Brushless Gimbal For Gopro 3/3+ . Check it out at http://www.fpvmodel.com/feiyu-fy-g3-ultra-3-axis-steady-handheld-brushless-gimbal-for-gopro-3-3-_g667.html 

Function Instruction

● Heading Following Mode —— Pitch and roll locking, heading smooth rotation follow the direction of the handheld.

● Heading And Pitch Following Mode —— Roll locking ,heading and pitch smooth rotation follow the direction of the handheld.

● Locking Mode —— Heading ,pitch and roll locking.

Identify the operation mode via switch to different status of the indicator light.Please check detailed indicator diagram below。

How To Use The Button

 

Identify the operation mode via switch to different status of the indicator light.Please check detailed indicator diagram below。

 

Operation Skill

The Skills Of Adjusting Pitch: Double click the button first to be in heading and pitch following mode. Adjust the attitude to move the pitch to the angle you want , then press the button once to lock the angle of pitch being in the heading following mode .

Autodyne Mode: Trun 180 degree of the gimbal(the USB port facing you). Adjust the angle of pitching through the method above, then you can autodyne easily.

Initialize The FY-G3Ultra Gimbal

FY-G3 Ultra Gimbal needs to be initialized when the following situation appears:

1.  After power on, the angle of pitch has a little angle difference with the horizon line.

2.  After power on, the angle of roll has a little angle difference with the horizon line.

3.  When the heading is in the till condition, the angle of heading amends frequently in a small angle .

【 The method of initializing the FY-G3 Ultra Gimbal 】

Keep the gimbal in the still condition, then power on , it will initialize automatically.After that the gimbal can work normally.

The Maximum Rotation Angle Of The Axis 

Note:Before you power up your gimbal,please mount the Gopro on first,,or it will cause the vibration.

For more of our Brushless Gimbal , please visit at http://www.fpvmodel.com. We are selling almost everything related to FPV.