Showing posts with label uav. Show all posts
Showing posts with label uav. Show all posts

Monday, September 22, 2014

PZ-4 1080P HDMI 10X Zoom FPV Camera for Digital Video Downlink

Newest PZ-4 1080p camera. Supports HDMI output jack. This camera is fully customizable through the on-screen navigation menu. Featuring flip and horizontal recording modes, variable fps, zoom function controlled with your radio transmitter. Perfect for UAV applications.

Sunday, September 21, 2014

757-3 Ranger EX long range FPV UAV platform Unibody big weight carrier

Fpvmodel.com offers two combos for customers' choice: 
One is fpv plane frame kit (landing gear included)+  10 inch propeller.
The other is  Ranger EX PNP combo, frame kit + power combo (3715 1200KV motor, 40A brushless ESC, 4x 9g servos and 10 inch propeller included) and  the  PNP combo is assembled except the propeller.
Notice: The joints for the control surfaces need to be reinforced before flying. 
Video for Ranger Ex specific:

Key Features
  • Big space, durable UNIBODY design
  • Special airfoil design for carrying big weight
  • Compatible with most kind of camera mounting
  • Capability to carry Camera Gimbal
  • Quick, easy to assembly, no glow required
  • Light weight and durable EPO wing construction  
FPV SYSTEM DEPLOYMENT
Special design and optimize for long range FPV, so there is a lot of space for mounting systems and different Camera mounting way, which not require any modify. 

EASY FOR ALL KIND OF CAMERA MOUNTINGAre you tired of modification a lot to mount your camera well? Now you don’t have to.We consider a lot kind of mounting for you, you can easy to mount it as better as you like. Stable, safe, and easy, just focus to make a wonderful video and enjoy it.
EASY FOR FPV CAMERA MOUNTING

Considering for professional FPV traveling, usually you will need a full HD camera and another FPV camera for Video transmission, so we leave a very convenient, safe, good view space for you to mount a FPV camera, just enjoy it. 

SPECIAL FUSELAGE DESIGNThe whole unibody fuselage is produced  by our copyright one-step moulding technology, which make it more durable and strong than other EPO foamy carbon tube. So it can avoid the tail effected by the air and cause the bump during the flight.
Special small platform in the tail is builded for video TX installation, can leave away from the radio equipment avoid causing nosy. In the same time the propeller can cool down it from over heat.

GRADIENTER PREINSTALLEDWe are thinking much more than others, for UAV system setup, to calibrate the sensors in horizontal level is very very importance. So the gradienter in the wing CG position will help a lot to setup the system.

VERY BIG SPACE FOR BIG BATTERIES
The very importance point for a airplane which can travel long range or not, should be the big batteries carrying ability. Thanks to our unibody technology,  we have much more a lot space than other foamy plane to carry almost twice capacity batteries. Of course we still have a lot more space for equipment, and sure we have lot more space for cooling down the battery.

The Ranger EX is a airplane is specially designed for Long Range FPV and quick and very easy trouble free Setup of this great big Bird. FPV Ranger EX offers few greater qualities that every FPV pilot looks forward to have in his / her RC FPV Plane.
  • It has bigger tougher PVC Fuselage that makes this plane a crash resistant plane, Tons of open space to let bigger hands do their job inside the fuselage when it comes to mount the electronics inside and also this big place makes it possible for one to mount more gear inside and keep things neat.
  • Ability to carry more payload means one can mount higher mAh batteries to get ultra long flight times needed for those long range FPV flights you are going to do
  • Tall Landing gear and dragger wheel means you can now safely take off and land from ground. No need to hand launch a big heavy plane with all the gears and dangerous and sharp propeller spinning at the back
  • Easy mounting of Various Brushless gimbals for GoPro 3 under the nose, now you can take ultimate stable flight videos of your long range flights
  • Super easy few step setup and glue free assemble.
  • Two pieces to carry only, Fuselage and Wings detach quick and easy for easy transportation and storage. Quick attachment on field for flight
  • And not to forget the super awesome and powerful flight performance with long flight endurance this plane offers
Wingspan: 1980mm (77.9 in)Overall Length: 1170mm (46 in)Flying Weight(without battery): 1500gProp Size: 1060 PropellerMotor Size: 3715 powerful out runner brushless motorSpeed Control : Easy-Plug 40A Switch-mode BEC brushless ESCServo 9-gram Servo * 4pcs included (PNP combo)Recommended Battery: 11.1V/14.8V 1800mAh ~ 10000mAh Li-Po ? See what it can do Charger: Not includedFlaps: YesRetracts: NoRadio: 2.4Ghz 6-ChannelsMinimum Age Recommendation: 14 yearsExperience Level: Beginners ~ ExpertRecommended Environment: OutdoorAssembly Time: Less than half hourIs Assembly Required: Yes
Due to the promotion is over,we back to the normal price,but you can choice the free shipping for purchase,thank you for your support.

For details, please refer to http://www.fpvmodel.com/757-3-ranger-ex-long-range-fpv-uav-platform-unibody-big-weight-carrier-_g583.html. FPV Model sells everything that related to FPV.

Wednesday, September 10, 2014

Some Important Parts of a FPV System

FPV is short for First Person View. Some people may also call it Remote Person View (RPV). It is usually used to pilot an UAV (Unmanned Aerial Vehicle) or a radio-controlled aircraft.

A FPV system consists of a FPV camera, radio transmitter, ESC (Electronic Speed Control), FPV gimbal, AV receiver, GPS/antennas, and a video display. Sometimes also include OSD (On Screen Display) the FPV goggles.

SKYZONE FPV video goggles Built-in 5.8Ghz Dual Diversity 32CH Receiver With Head-Tracker V2
SKYZONE FPV video goggles Built-in 5.8Ghz Dual Diversity 


Above FPV accessories are the most important parts to a FPV system. FPV camera connects to FPV transmitter which will send audio and video signals to a AV receiver, and finally all the information shown on display. FPV player can see the information also on FPV goggles.

Aomway Mini 5.8Ghz 200mW 32CH Wireless A/V Transmitter TX
Aomway Mini 5.8Ghz 200mW 32CH Wireless A/V 


Radio transmitter: transmitting and sending audio/video signals to the FPV AV Receiver.

Boscam HD08A 1080p Full HD FPV Mini Sports Camera
Boscam HD08A 1080p Full HD FPV Mini Sports Camera


FPV camera: it connects directly to the radio transmitter. If image quality DOES matter to you, better buy a good FPV camera. Considering to weight, battery situation and flying time, you'll need to buy FPV camera with suitable size and weight.

FPV Gimbal: Something assembled on FPV plane to mount the FPV camera.

AV receiver: It is used for receiving the signal sent by the radio transmitter.

The video display: It is used for displaying the video received by the AV receiver. During a FPV flying, we can easily find whether the signal is strong or week to ensure the FPV flying in an excellent condition.

The Antennas: Antennas have a very important role in the performance of your FPV system. The bigger the sensibility of the Antenna connected to the receiver, the better and the stronger the video signal will be.