ZMR250 V2 3K Carbon Fiber Frame w/Full PDB Released

FPV Model has newly released a new upgraded ZMR250 V2 with full PDB & LED.

FPV Model has taken the time to make sure that this is the ZMR you want. The frame has been reworked to include both top and bottom plates are “true” 2mm plates. Also the 4mm thick arms are included in the package, so there is no need to buy them seperately.( 4mm arms can be found running anywhere from 6-15 dollars each!)

The carbon fiber has been sourced and quality checked to ensure that you are getting the best quality 3k carbon fiber around. Including a full PDB w/LED lighting system you cant find a better deal out there! Introducing the ZMR250 V2!!!

Weight: Frame, hardware, and PDB total 185 grams

Features:

• “True” 2mm Top & Bottom Plates
• 4mm Thickness on Arms for Added Durability
• Full PDB w/LED

ZMR250 V2: http://www.fpvmodel.com/zmr250-v2-250mm-carbon-fiber-mini-fpv-quadcopter-frame-kit-with-pcb-board-and-led_g1005.html

ZMR250 Mini H Quad Build Manual

Known as the ZMR250 or H250, this mini H quad frame has been everywhere. It has been regarded as one of the best quadcopters.

ZMR250 is a light weight, small size mini quadcopter with long flight time and easy to refit. The frame body with 1.5mm carbon fiber plate and the frame-arm also adopts 3mm carbon fiber plate, it ensures the strength and reduces the vibration when flying. 

Here comes a brief build manual of ZMR250 for your reference. If you are not sure about what parts you will need for a build, simply refer to the items listed on our ZMR250 ARF Packages. 

First of all, install the 8 long standoffs (spacer) on the bottom plate.

Then install the arms and bottom plate.

Check the length of ESC and motor wires on the frame.

Cut the wires of the motors and ESC’s to a reasonable length.

Solder the wires in order. The front side of ESC connect to clockwise of motor, the reverse side of ESC connect to counterclockwise of motor.

And then install the motors on the arms.

Use the 3M adhesive tape stick to the ESC’s.

The above installations are just for your reference, you can also directly install the ESC’s on the arms, and then the wires get through the underside of frame.

Cut the outer part of camera. 

And then install the four M2x10, nuts and nylon screws on the camera board.

Install flight controller and fix it with 3m adhesive tape.

Cut the camera wires to a reasonable length.

Cut the wires of TX, only keep the yellow AV wire. Others finished with head-shrink tubes.

Then solder yellow wire of camera with yellow wire of TX.

Parallel connect TX power supply wires (red & black) and camera power supply wires (red & black).

Then solder them as above.

And then wiring and getting through them to bottom plate.

Parallel connect and solder the ESC power supply wires and TX power supply wires.

Solder the extension wire of plug, and then the power supply plug.

Plug the TX and camera separately.

Clean up the wires of motors & ESC’s with head-shrink tubes, and others wires with ribbons. 

Install the damping balls.

Fix camera, TX and screws. The build of ZMR250 is done.

Original Post: http://www.fpvmodel.com/blog/zmr250-mini-h-quad-build_show92.html

ZMR250 250mm Mini Quadcopter FPV ARF Package Sold at US$199.99

The FPV ARF Package is now available at http://www.fpvmodel.com/zmr250-250mm-mini-quadcopter-fpv-arf_g762.html.

An affordable Mini ARF package that comes complete with heat shrink, cable sheathing, FC w/ PID settings and full FPV gear for the quad frame. What do you think? Refer to my previous post http://fpvplane.blogspot.hk/2014/09/an-affordable-mini-arf-package-will-be.html 

This FPV ARF package comes with ZMR250 carbon fiber frame. 250mm. Carbon Fiber has a nice sheen to the finish and all tooling edges are nice and smooth. Using Dragonfly MC1806 2300kv Mini Motors.

All up weight 498g.

This is a ZMR250 FPV ARF combo, It includes almost everything you need for your building work with ZMR250. Don't worry what you need and just enjoy the  building process, we provide you with a promotion price and make sure you will get a perfect flying experience with our ARF package.

Package Includes:

ZMR250 250MM mini quadcopter frame kit x 1

DragonFly MC1806 KV2300 motor x 4

ZTW Spider 12a ESC x 4

5030 electric CW/CCW props x 4 pairs

Naze32 Acro Funfly flight controller x1 (or CC3D Flight Controller or Naze 32 Full version flight Controller).

SONY Effio-e 4140+811 1/3 CCD 2.6mm Lens 700TVL camera x 1

AOMWAY 5.8g mini 200mw 32CH transmitter x 1

Battery velcro straps x 2

5.8G clover 3-leaf TX antenna x 1

20CM servo extension cable x 2

3M double sided adhesive tape x1

Also, silicon wires, straps, shrink tubes, T-plug etc that everything as showed in above pictures.

What else you need (choice which you prefer from our website):

Radio, battery (3s 1300-2200mah), receiver and monitor.