ZMR250 V2 w/ New PDB Released

FPV Model is glad to annouce that the PDB of ZMR250 V2 now has been upgraded from V1.0 to V1.2.

We have taken the advise of many and reworked the PDB. It now features ESC pads on the top and bottom of the board. Traces and main power distribution have been routed in a manner to avoid running under the arms. Optional 12V regulator w/ built in LC filter is now available.

Besides, the issue of misaligned MinimOSD solder pins that may exist in the previous version now solved. Also, the arms for fitting 2204/2206 motors are selectable.

Except the ZMR250 V2 frame kits, FPV Model now also offer series of ZMR250 V2 ARF packages at a discounted price, including two ARF Pro packages that come with T-motor brushless motors.

Frame Kit only: http://www.fpvmodel.com/zmr250-v2-250mm-carbon-fiber-mini-fpv-quadcopter-frame-kit-with-pcb-board-and-led_g1005.html

ARF Kits (Standard): http://www.fpvmodel.com/zmr250-v2-250mm-mini-quadcopter-fpv-arf-combo_g1006.html.

ARF Pro w/ T-motor MN2204/MN2206 Motors: http://www.fpvmodel.com/zmr250-v2-arf-pro-w-t-motor-mn2204-mn2206-motors-optional-_g1049.html

ARF Pro w/ T-motor MN1806 Motors: http://www.fpvmodel.com/zmr250-v2-arf-pro-w-t-motor-mn1806-motors_g1055.html

ZMR250 V2 Build Manual

Congratulations on the purchase of the ZMR250 V2 Mini FPV Quadcopter! This mini quadcopter is a ton of fun and building can be a really enjoyable experience too. We hope this manual will assist you with your build.

Recommended Parts for the Build:

ZMR250 V2 250MM mini quadcopter frame kit x 1
Dragonfly MC1806 2300KV Brushless Motor x 4 (2cw+2ccw)
DYS SN20A Mini ESC x 4
Dragonfly 5030 CW/CCW props x 2 pairs 
Naze32 Acro Funfly flight controller x1
SONY Effio-e 4140+811 1/3 CCD 3.6mm Lens 700TVL camera x 1 
AOMWAY 5.8g mini 200mw 32CH transmitter x 1
Velcro Battery Strap  x 2
FPV 1.2G 5.8G Micro BEC 12V x 1
5.8G clover 3-leaf TX antenna x 1
20CM servo extension cable x 2
3M double sided adhesive tape x1

If you are not sure about what spare parts are required, just simply refer to the ones that included in theZMR250 V2 ARF Package.

Now lets start the building.

1. Solder the Transmitter and Camera

Cut the wires of camera to suitable length and solder them to PDB.
Red wire: Power
Black Wire: GND
Yellow: Signal

Solder the power supply wire and video wire (yellow) of transmitter to PDB.


2. Install OSD

The OSD firmware must be flashed and compatible to the Flight Controller before installation. If you don’t need to install the OSD, please just skip this step.

Solder the pin headers onto PDB.

Install the OSD on PDB. Insert it onto the pin heads and soldered. After secured, cut off the unnecessary length of pins.

3. Install the Buzzer

Pay attention to the positive pole “+” on the buzzer.  It needs to be soldered to the buzzer location on PDB.

Cut off the unnecessary pins.



4. Install ESCs
 
Solder the ESCs onto PDB.


The black wires can be parallel connected to the negative pole “-”.
 
 
5. Install Brushless Motors


The motor’s rotation direction can be changed by changing any two wires.

6. Extension


If the OSD and buzzer are installed, then you’ll need to use the supplied wires to solder onto PDB. Please take notice of wire length.


7. Install Flight Controller

Notice on the flight controller: It doesn’t require for soldering if the ESCs have no BEC. The flight controller can be powered by soldering to “5V” (circled in red).
 
 
 
8. Install ZMR250 V2 Frame
 
Important Reminder: In order to protect the PDB from short circuit, please use the supplied insulation washers when fastening arms to the PDB. 

Way to go! You’ve almost completed the ZMR250 V2 build. Power on, and you are now ready to fly!

Skyzone 5.8Ghz 600mw FPV System (T600+R600)

FPV System: http://www.fpvmodel.com/skyzone-t600-5-8ghz-600mw-a-v-transmitter-r600-oled-display-5-8g-32ch-receiver-for-fpv_g1036.html

T600 Transmitter: http://www.fpvmodel.com/skyzone-t600-5-8ghz-600mw-a-v-transmitter_g1038.html

R600 Receiver: http://www.fpvmodel.com/skyzone-r600-oled-display-5-8g-32ch-receiver-for-fpv_g1039.html

Skyzone newly released a powerful 5.8ghz 600mw FPV system that come with 600mw video transmitter T600 and receiver R600 that specially made for FPV and speed racing.

The feature of this system is the “R” band in the T600 (32 Ch) Video Transmitter, which is 37mhz apart from the next channel, all 8 sub-channels in “R” band will not interfere with each other, this is great news for FPV racers, as there are many people flying in the same place, their FPV system always jam with each other, with this T600 Video transmitter using “R” band, everyone will be happy.

For the R600 Receiver, it also has 32 channels (4 main channels and 8 sub channels), of course with the “R” band, and it has Auto Search, press a button and it looks for your aircarfts video feed. Came with AV output cable for TV monitor.

Join ZMR250 Video Competition And Get A Chance To Win $1000 Cash

Calling all pilots!!! Now join the 1st FPVModel ZMR250 Video Competition, you will get a chance to win $1000.00 USD cash and a ZMR V2 ARF Pro.

Look here, FPV Model is having its first Flight Video Competition. To the winner goes the spoils, and weve got some good offerings!!! To start with hows 1,000.00 USD in cold hard cash for the victor? Moolah, greenbacks, scratch. Whatever you wanna call it, cash for your pockets! 

Lets make this a competition and share with EVERYONE you know that flies a ZMR!!!

Date: Aug 1st, 2015 to Sept 1st, 2015

Prize: 

• 1. First Place: US$1000.00 cash and a ZMR V2 ARF Pro
• 2. Second Place: ZMR250 V2 ARF Pro.
• 3. Third Place: ZMR250 V2 ARF
• 4. Another Eight Participants will be awarded a ZMR250 V2 frame each.
• 5. All the Participants will get a coupon code to save 6% on the next purchase at fpvmodel.com.

Rules:

• 1. The Participant must use a ZMR250 frame to enter in the competition, this can be a ZMR250 V2 or a ZMR250 V1. (Purchased from any vendor not solely FPV Model)
• 2. The Participant should indicate in the video and the video description that the video is for participating the 1st FPVModel Racing Competition. 
• 3. The video must be at least 3 minutes long.
• 4. Each person that participates in the competition can enter up to three videos.
• 5. After the video is completed, the Participant should post it to both Youtube channel and ZMR250 V2 Group (https://www.facebook.com/groups/1426617874326978/), and let FPV Model know where to find it.
• 6. The dealers and staff of FPV Model are not allowed to participate in the competition.
• 7. All the videos will be reviewed and rated by FPV Model. The winners will be chosen based on the video quality, creativy and flying skills.
• 8. FPV Model deserves the right to use the winners’ videos on fpvmodel.com and other related websites.
• 9. The Participant is solely responsible for the originality of the video, taking full responsibility for the possible damage that may cause to third parties. 
• 10. The rules are subject to change without prior notice.

ZMR250 V2 ARF: Quality, Affordability, Convenience!

"True" 2mm top & bottom plates, 4mm thickness on arms for added durability and full PDB w/LED. We have taken the time to make sure that this is the ZMR V2 you want. 

These are ARF combos for ZMR250 V2 mini quad. They include almost all the things you need for your building work with ZMR250 V2 frame kit. Dont worry what you need and just enjoy the build. We offer you a favorable price and make sure you will get a perfect flying experience with our ARF packages.

If theres any special instruction, please feel free to contact us.

ARF1 / ARF2 / ARF3 Package include:

ZMR250 V2 250MM mini quadcopter frame kit x 1
FPVModel MC1806 2300KV Brushless Motor x 4 (2cw+2ccw)
DYS SN20A Mini ESC x 4
Dragonfly 5030 CW/CCW props x 8 pairs
Naze32 Acro Funfly flight controller (ARF 1) /Naze32 full version flight controller (ARF 2) / CC3D flight controller (ARF 3) (optional) x1
SONY Effio-e 4140+811 1/3 CCD 3.6mm Lens 700TVL camera x 1
AOMWAY 5.8g mini 200mw 32CH transmitter x 1
Velcro Battery Strap  x 2
FPV 1.2G 5.8G Micro BEC 12V x 1 (Added on July 3rd, 2015)
5.8G clover 3-leaf TX antenna x 1
20CM servo extension cable x 2
3M double sided adhesive tape x1
and silicon wires, straps, shrink tubes, T-plug etc that everything showed in the picture.

ARF 4 Package includes:

ZMR250 V2 250MM mini quadcopter frame kit x 1
FPVModel MC1806 2300KV Brushless Motor x 4 (2cw+2ccw)
DYS SN20A Mini ESC x 4
Dragonfly 5030 CW/CCW props x 8 pairs
CC3D flight controller x1
SONY Effio-e 4140+811 1/3 CCD 3.6mm Lens 700TVL camera  x 1
AOMWAY 5.8g mini 600mw 32CH transmitter x 1
Velcro Battery Strap  x 2
FPV 1.2G 5.8G Micro BEC 12V x 1 (Added on July 3rd, 2015)
5.8G clover 3-leaf TX antenna x 1
20CM servo extension cable x 2
3M double sided adhesive tape x1
and silicon wires, straps, shrink tubes, T-plug etc that everything showed in the picture.

RTF 1 (assembled) includes:
ZMR250 V2 250MM mini quadcopter frame kit x 1 
FPVModel MC1806 2300KV Brushless Motor x 4 (2cw+2ccw)
Devo 10 radio x 1  
DYS SN20A Mini ESC x 4
Dragonfly 5030 CW/CCW props x 8 pairs
CC3D flight controller  x1
SONY Effio-e 4140+811 1/3 CCD 3.6mm Lens 700TVL camera x 1
AOMWAY 5.8g mini 200mw 32CH transmitter x 1
Velcro Battery Strap  x 2
FPV 1.2G 5.8G Micro BEC 12V x 1  (Added on July 3rd, 2015)
5.8G clover 3-leaf TX antenna x 1
20CM servo extension cable x 2
3M double sided adhesive tape x1
and silicon wires, straps, shrink tubes, T-plug etc that everything showed in the picture.


RTF 2 (assembled) includes:

ZMR250 V2 250MM mini quadcopter frame kit x 1
Devo 10 radio x 1
FPVModel MC1806 2300KV Brushless Motor  x 4 (2cw+2ccw)
DYS SN20A Mini ESC x 4
Dragonfly 5030 CW/CCW props x 8 pairs
CC3D flight controller x1
Velcro Battery Strap  x 2
FPV 1.2G 5.8G Micro BEC 12V x 1  (Added on July 3rd, 2015)
20CM servo extension cable x 2
3M double sided adhesive tape x1
and silicon wires, straps, shrink tubes, T-plug etc that everything showed in the picture.


RTF 3 (assembled) includes:

ZMR250 V2 250MM mini quadcopter frame kit x 1
FPVModel MC1806 2300KV Brushless Motor x 4 (2cw+2ccw)
DYS SN20A Mini ESC x 4
Dragonfly 5030 CW/CCW props x 8 pairs
CC3D flight controller x1
Velcro Battery Strap  x 2
FPV 1.2G 5.8G Micro BEC 12V x 1  (Added on July 3rd, 2015)
20CM servo extension cable x 2
3M double sided adhesive tape x1
and silicon wires, straps, shrink tubes, T-plug etc that everything showed in the picture.

What else you need (choose which you prefer from our website):  Radio, battery (3s 1300-2200mah), receiver and monitor.

Friendly Reminder: 

• The camera requires 12V power input.
• PCB Power: 3S~4S
• A 12V BEC will be required for using 4S Lipo. We have added the FPV 1.2G 5.8G Micro BEC 12V  to above ARF packages, but it may not included in the orders placed before July 3rd, 2015. 

Build Instructions: PDF file Download, or reference to ZMR250 Mini H Quad Build

MFD MyTwinDream 1800mm FPV Plane

My Twin Dream 1800

Long Range...no problem!
Mapping....no problem!
Overall fpv flier...no problem!!!

This is the MFD MyTwinDream 1.8 meter wingspan EPO FPV plane. This plane not only features superb handling, but also quite stable. The interior of the fuselage is large enough to fit most anything you could ever want inside of this amazing aircraft. 

This is an excellent choice for both average and advanced pilots. Featuring the felexiblity of its vast interior space, this is also an excellent choice for professionals. Being a twin design it also offers redundancy in those times of unexpected motor/ESC loss while in flight. Get yours today and enjoy FPVMODELs excellent shipping times and unbeatable free shipping offer on 200 dollars or more. 

Specifications:

• 1. Wingspan: 1800MM 
• 2.Body length 1220mm
• 3.The internal maximum width is more than 13CM
• 4. The internal maximum length is 86CM
• 5. Empty weight: 1.1kg 
• 6. Maximum Takeoff Weight: 4.5-5.3kg 
• 7. Supply voltage: 4-6s

Recommended Parts (not included)：

• 1. Motor: 2814 High efficiency motors x 2
• 2. ESC : 30A ESC x 2
• 3. Servo: 9g*4pcs
• 4. Prop: 9x6 propeller x 2
• 5. Cables and XT60 connector

Features：

MyTwinDream 1800 is a multi-platform carrier-based aircraft, and there are video recorder installation platforms (points) (supporting the installation of 2-axis and 3-axis platforms) on the top of both the head and the fuselage

The machine body has giant capacity which can support the mirrorless cameras down installation (the maximum width of inner space is larger than12CM) 

Fast disassembly available for the whole plane: horizontal tail/verticaltail/main wing

Main wing (which can be assembled according to your own preference) 1) Divide into left and right segments (traditional)  2) Divide intofour segments with small volume, which is convenient for going out  3) Stick two wings in the middle segment to the fuselage (prepare for the flightrapidly)

ZMR250 V2 3K Carbon Fiber Frame w/Full PDB Released

FPV Model has newly released a new upgraded ZMR250 V2 with full PDB & LED.

FPV Model has taken the time to make sure that this is the ZMR you want. The frame has been reworked to include both top and bottom plates are “true” 2mm plates. Also the 4mm thick arms are included in the package, so there is no need to buy them seperately.( 4mm arms can be found running anywhere from 6-15 dollars each!)

The carbon fiber has been sourced and quality checked to ensure that you are getting the best quality 3k carbon fiber around. Including a full PDB w/LED lighting system you cant find a better deal out there! Introducing the ZMR250 V2!!!

Weight: Frame, hardware, and PDB total 185 grams

Features:

• “True” 2mm Top & Bottom Plates
• 4mm Thickness on Arms for Added Durability
• Full PDB w/LED

ZMR250 V2: http://www.fpvmodel.com/zmr250-v2-250mm-carbon-fiber-mini-fpv-quadcopter-frame-kit-with-pcb-board-and-led_g1005.html